Daikin Fan Coil

Error Code U1

Troubleshooting guide for the Daikin Fan Coil system fault U1.

ACLogics Standardize Fan Coil diagnostics See the commercial workflow → Standardize Fan Coil diagnostics
Disclaimer: This information is for general reference. Error codes can vary by model and production year. Always refer to your machine's specific manual and the information printed on the unit itself.

System Diagnosis

Reverse phase, open phase

Potential Causes & Solutions

  • Power supply reverse phase.
  • T phase open phase.
  • Defective outdoor unit PCB (A1P).

Verify Before Replacing Parts

  1. Confirm the exact Daikin model family and fan coil context before acting on a generic code description.
  2. Confirm filter condition, blower operation, and coil cleanliness before replacing any controls.
  3. Measure airflow-related readings that match the symptom, such as temperature split or static pressure.
  4. After the correction, run the system long enough to confirm the code does not return under normal load.

Field Signals to Confirm

What usually confirms it

Weak airflow, abnormal temperature split, or repeated protective trips tied to blower performance.

What can fool you

Charge and control faults often look similar until airflow and coil condition are verified first.

When to Escalate the Call

  • The code returns after airflow and cleanliness checks are corrected.
  • You find evidence of duct or static issues that require a larger system review.

Diagnosing Fan Coil across a fleet?

ACLogics standardizes commercial Fan Coil diagnostics across your whole team — consistent steps, less guesswork on every call.

See the commercial workflow →